CH7-1015 is intended for use as a simple and precise instrument for measurements of the relative frequency difference of precision crystal oscillators and rubidium frequency standards, calculation of metrological characteristics (Allan variance, RMS, drift etc.) with the mapping process and the measurement results on the device screen and (or) on the external PC or Tablet PC. Software included. Remote control. Work as part of an automated system.
| 1. The nominal value of the reference signal frequency, MHz | 5, 10 |
| 2. The nominal value of the test signal frequency, MHz | 1; 2,048; 5; 10; 10,24 |
|
3. The maximum deviation of the frequency of the input signals from the nominal value, Hz, at range |
± 1 |
| 4. Input signals amplitude at a load of 50 Ω, Vrms, at range | от 0,4 до 1,2 |
| 5. RMS error in determining the relative frequency deviation | |
| for the averaging time 1 s | 8·10-13 |
| 10 s | 2·10-13 |
| 100 s | 5·10-14 |
| 3600 s | 1·10-14 |
| 6. AC power supply voltage, V | 198 to 242 |
| 7. Input power, W | 30 |
| 8. Dimensions (depth×width×height), mm | 330x255x110 |
| 9. Weight, Kg | 3,1 |
